1.The precise process better guarantees the accuracy of the leveling scale:±0.5mm/m

2.In the drop test:3 drops at a height of 1.2m above the ground,the accuracy does not change by more than 0.2mm/m

3.In the high and low temperature test:after a cycle from-18°C to 50°C,the accuracy changes by 0.2mm/m at room temperature.

4.The process used is die-casting,one-piece moulding

5.The level has both horizontal and vertical horizontal bubbles,which can meet most of the use environment

6.Optional magnets can be added to the bottom of the level to make construction and storage more convenient.

7.The ends of the level are equipped with end caps to protect the machine in case of accidental dropping.

8.The bottom of the level is milled to make it smooth and flat.

9.The two ends of the level are hollowed out to meet the customer's requirements on the wall,freeing up your hands.